These utilities include supply of main resources like water, gas or electricity, and discretion of other toxic waste. 

Investing in sewer line repair is important to avoid any blockage and backup. Most of the plumbing and service companies provide all services in one package for a smooth experience. 

Sewerage water contains deadly bacteria, parasites, and fungi which is hazardous for human health and the home. A broken sewer line should be quickly addressed since it can cause serious property damage.

Line damage is hard to notice and repair because it is hard to fix due to collapsed pipelines and drains. Detecting damaged pipelines is tough for several reasons including age, earth movements, cold weather, vegetation, and external pressure. 

Do not let your pipelines reach a point where they are irreparable because replacement needs a tremendous amount of money. Here we have a list of problems and their common solutions:

SIGNS AND SOLUTIONS OF A SEWER LINE BREAKDOWN: 

There are various signs to pick and there the warning signs of a busted water pipe in your sewer. We suggest hiring a plumbing expert to analyze the situation and decide the required services.

1. Backup and blockages:

A sewage backup is typically caused by a blockage in the line. If you are experiencing throwbacks while flushing, it might be an underlying problem in your main sewer line. 

The easier way to identify the problem is by checking if the lines are excessively clogged or one single drain. The problem might not be as big as the whole line, and it is fixable before getting out of hand.

Causes: Regular backups may be a problem if your sewage lines are breaking or deteriorating. Other intrusions like root growth, channeling, cracks in the soil, or misalignment of pipes can also be the underlying issue. 

The solution: The most effective way of clearing blockages is with a plunger but in the worst case, this tool isn’t handy. If the problem remains, try using hot water and dish soap to break down the grease and fluid buildup. If your toilet is severely clogged, pour 2-3 cups of bleach in the toilet to dissolve the flesh and feces. 

2. Mold growth:

Mold only needs about 55% moisture and humidity to grow, the walls behind and under your toilet is the perfect atmosphere. When you notice mold growth in your home which smells moist, then you might have a leakage in your drains. If you live in Denver, try searching for Denver sewer line repair to find best service providers in your area. 

Causes: Moisture is the best friend of mold and leaking pipes or flooding can build-up mold in a matter of hours. Excessive moisture and warm environments are perfect for the bacteria to rise. It can grow in paints, wallpapers, cardboard boxes, wood products, fabrics, carpets, and ceiling tiles.

The solution: Fix the issue of moisture and humidity to clear the colonial environment of growth. Removal of stubborn mold from the hard surfaces is tough work but DIYs like soap and water work well to cut the cause. Another way is to use a diluted solution of bleach and water, with a gallon of water with 1 cup bleach. 

3. Slow drain:

Slow drains are a symptom of blockages forming towards a sewage backup. Clearing the line with a plunger sometimes isn’t enough because there are also other factors of underlying issues. 

Causes: Intrusions such as tree roots and growth can be the reason for degraded pressure. Channeling or cracks are the initial stages of any drain clog, which can lead to permanent pipeline damage. 

The solution: Most people swear by the warm water, baking soda, and vinegar solution method which is a good DIY. The use of harsh drain cleaner chemicals daily can eat away the cast iron and weaken its strength. 

4. Lush patches:

Your main sewer line runs underneath your yard to connect the septic tank below ground. Lush grass is one of the indications of water leakage and lush patches show the affected area. 

Causes: The cause lies in the basic mechanism of your underground tunnels, and the form of undetected leaks. Under-treated wastewater can create conditions for productive growth and soggy lawns.

The solution: The solution is to keep a check on the excessive growth of lush grass. Trimming and cutting off the excess can do the job for now, but try to manage root cause of growth.

5. Settlement and cracks:

Extreme symptoms of sewer pipeline damage include crack formation and wall settlement which can form sinkholes. If left untreated for long, it can lead to the weakening and misbalance of the foundation.

Causes: Walls and soil love moisture because they tend to dry out and weaken overtime because humidity is the food of bacteria. The major causes of cracks in the base can form with excessive moisture through plumbing leaks and flooding. Concrete tends to shrink over time, which is why it absorbs moisture immediately. Other causes can be earthquakes, storms, extreme heat, drought, and soil expansion.

The solution: There are various types of sealants and solutions available in the market to fix minor cracks through heatless mixes. Epoxy sealers and injection ports are available for industrial and commercial usage to fill gaps and seal cracks. After the wall dries, and the cause is still neglected, the problems will keep occurring. 

Many other problems can state a broken line, for example, rodent and insect infestation. Most of these indications are hard to pick and easy to ignore but important to treat. 

In conclusion, the best results are only possible when the cause is eliminated. Make your house feel like a home with hygiene and conventional repair. Our team at Greenfield services dedicates their time and efforts towards proper inspection to find out the root causes.